Class 10 SELINA Solutions Physics Chapter 2 - Work, Energy and Power

Work is said to be done only when the force applied on a body makes the body move. It is a scalar quantity.

(i) When force is in direction of displacement, then work done , W = FxS

(ii) When force is at an angle to the direction of displacement, then work done, W= F S cos

(a) When force is at an angle to the direction of displacement, then work done, W= F S cos

(b)

(i)For zero work done, the angle between force and displacement should be 90^o as cos 90^o=0

W =FScos90^o= FSx0=0

(ii)For maximum work done, the angle between force and displacement should be 0^o as cos0^o=1

Hence, W=FScos 0^o=FS

Two conditions when the work done is zero are:

(i)When there is no displacement (S=0) and,

(ii)When the displacement is normal to the direction of the force ( =90^o).

(i) If the displacement of the body is in the direction of force, then work done is positive.

Hence, W= F x S

For example: A coolie does work on the load when he raises it up against the force of gravity. The force exerted by coolie (=mg) and displacement, both are in upward direction.

(ii)If the displacement of the body is in the direction opposite to the force, then work done is negative.

Hence, W =- F x S

For example: When a body moves on a surface, the force of friction between the body and the surface is in direction opposite to the motion of the body and so the work done by the force of friction is negative.

Work is done against the force.

When a body moves in a circular path, no work is done since the force on the body is directed towards the centre of circular path (the body is acted upon by the centripetal force), while the displacement at all instants is along the tangent to the circular path, i.e., normal to the direction of force.

Work done by the force of gravity (which provides the centripetal force) is zero as the force of gravity acting on the satellite is normal to the displacement of the satellite.

(a) No, work is not done since the wall does not move.

(b) No, work is not done since the box on the coolie's head does not move either.

(c) Yes, work is done since the boy moves vertically against gravity while climbing the stairs.

Energy is the capacity to do work and work done is equal to energy spent. Coolie X carrying a load up a slope will do more work as this works involve a change in potential energy, kinetic energy and loss of energy due to friction. Work done in carrying the load in horizontal frictionless surface does not involve change in potential energy and work done by the friction is also zero.

Force applied by the fielder on the ball is in opposite direction of displacement of ball. So, work done by the fielder on the ball is negative.

When a coolie carries a load while moving on a ground, the displacement is in the horizontal direction while the force of gravity acts vertically downward. So the work done by the force of gravity is zero.

S.I unit of work is Joule.

C.G.S unit of work is erg.

Relation between joule and erg :

1joule= 1N x 1m

But 1N =10⁵dyne

And 1m=100 cm= 10² cm

Hence, 1 joule= 10⁵dyne x 10²cm

=10⁷dyne x cm=10⁷erg

Thus, 1 Joule= 10⁷ erg

S. I unit of work is Joule.

1 joule of work is said to be done when a force of 1 newton displaces a body through a distance of 1 metre in its own direction.

Relation between joule and erg :

1joule= 1N x 1m

But 1N =10⁵dyne

And 1m=100 cm= 10² cm

Hence, 1 joule= 10⁵dyne x 10²cm

=10⁷dyne x cm=10⁷erg

Thus, 1 Joule= 10⁷ erg

Let a body of mass m fall down through a vertical height h either directly or through an inclined plane e.g. a hill, slope or staircase. The force of gravity on the body is F=mg acting vertically downwards and the displacement in the direction of force (i.e., vertical) is S=h. Therefore the work done by the force of gravity is

W= FS =mgh

Let a boy of mass m climb up through a vertical height h either through staircase of using a lift. The force of gravity on the boy is F=mg acting vertically downwards and the displacement in the direction opposite to force (i.e., vertical) is S=-h. Therefore the work done by the force of gravity on the boy is

W= FS =-mgh

or,the work W=mgh is done by the boy against the force of gravity.

The energy of a body is its capacity to do work. Its S.I unit is Joule (J).

eV measures the energy of atomic particles.

1eV= 1.6 x 10^-19J

1 J = 0.24 calorie

1kWh = 3.6× 10⁶ J.

Calorie measures heat energy.

1calorie = 4.18 J

1kWh is the energy spent (or work done) by a source of power 1kW in 1 h.

1kWh = 3.6 x 10⁶J

The rate of doing work is called power. The S.I. unit of power is watt (W).

Power spent by a source depends on two factors:

(i) The amount of work done by the source, and

(ii) The time taken by the source to do the said work.

Example: If a coolie A takes 1 minute to lift a load to the roof of a bus, while another coolie B takes 2 minutes to lift the same load to the roof of the same bus, the work done by both the coolies is the same, but the power spent by the coolie A is twice the power spent by the coolie B because the coolie A does work at a faster rate.

S.I unit of power is watt (W).

If 1 joule of work is done in 1 second, the power spent is said to be 1 watt.

(a)Power is measured in terms of horse power.

(b) 1 horse power =746 watt

Watt (W) is the unit of power, while watt hour (Wh) is the unit of work, since power x time = work.

(a) Energy is measured in kWh

(b) Power is measure in kW

(c) Energy is measured in Wh

(d) Energy is meaused in eV

Concept insight: Energy has bigger units like kWh (kilowatt hour) and Wh (watt hour). Similarly bigger unit of power is kW (kilo watt).

The energy of atomic particles is very small, and hence, it is measured in eV (electron volt).

Yes, there is no transfer of energy if the body is acted upon by the force normal to the displacement. 

When the body is moving in a circular path, the force is normal to its displacement and the work done is zero.

Thus, there is no transfer of energy.

(d) 746 W

1 hp = 746 W

(c) Energy

The unit kWh is the unit of energy.

Force acting on the body = 20 kgf = 20 x 10 N = 100 N

Displacement, S = 1 m

Work done= force x displacement in the direction of force

(i) When, θ = 0°

W = F x S Cos θ

W = 200 x 1 x 1 = 200 J

(ii) When, θ = 60°

Work = force x displacement in the direction of force

W = F x S cos

W = 200 x 1 cos60^o

W = 200 x 1 x 0.5.....(∵ cos60^o=0.5)

∴ W =100 J

(iii) Normal to the force:(i.e., θ = 90°)

Work = force x displacement in the direction of force

W = F x S cos

W = 200 x 1 cos 90^o

W = 200 x 1 x 0 ...(∵ cos90^o =0)

∴ W = 0 J

Mass of boy=40 kg

Vertical height moved, h=8m

Time taken, t=5s.

(i) Force of gravity on the boy

F= mg =40 x 10 =400N

(ii)While climbing, the boy has to do work against the force of gravity.

Work done by the boy in climbing= Force x distance moved in the direction of force

Or, W = F x S= 400 x 8= 3200 J

(iii) Power spent =

Given that:

Work = 7.4 kJ = 7400 J

Distance = 74 m

Time = 2.5 s

(i) Work done by the man = Force x distance moved in direction of force

Work, W = F x S

7.4 x 10³ = F x 74

(ii) Power spent = 

i.e., Power spent (H. P) = 

Force= mg= 200 x 10=2000N

Distance, S= 2.5m

Time , t=5 s

(i)Work done, W= F S

W =2000 x 2.5m= 5000J

(ii)Power developed =

(i)Energy spent by machine or work done= F S

Work, W =750 x 16= 12000J

(ii)Power spent=

Energy consumed = power x time

(i)Energy = 3 kW x 10 h=30kWh

(ii)1 kilowatt hour (kWh)= 3.6 x 10⁶ J

30kWh = 30 x 3.6 x 10⁶ J

= 1.08 x 10⁸ J

Volume of water= 50 L=50 x10^-3 m³

Density of water= 1000kgm^-3

Mass of water= Volume of water x density of water

= 50 x10^-3 x1000= 50kg

Work done in raising 50kg water to a height of 25m against the force of gravity is:

W = mg x h= mgh

Power P=

Given that,

Weight, w = 600 kg

Depth, h =75 m

Time, t = 10 s

Efficiency, η = 50%

(a) Work done in raising a 500kg mass to a height of 90m against the force of gravity is:

W = mg × h= mgh

W= 600 ×10 × 75 = 4.5 ×105 J

(b) Now,

Power = Work / time

Power =450000/10 

Power = 45000 W = 45 kW

Therefore, the power at which the pump works is 45 kilo Watts.

(c) The power rating of the pump if its efficiency is 40%. 

Given, force = 1000N, velocity=30m/s

Power, P= force x velocity

P = 1000 x 30 = 30,000W = 30kW

Power =40kW

Force= 20,000N

Power = force x velocity

Velocity =

Power exerted due to force is

Total distance covered in 30 steps , S= 30 x 20 cm = 600 cm = 6 m

Work done by the boy in climbing= Force x distance moved in direction of force

Work, W= F x S= 350 x 6 =2100 J

Power developed=

(i) The work done by persons A and B is independent of time. Hence both A and B will do the same amount of work. Hence,

(ii)Power developed by the person A and B is calculated as follows:

A takes 20 s to climb the stairs while B takes 15 s, to do the same. Hence B does work at a much faster rate than A; more power is spent by B.

Power developed (and amount of work done is same)

Given that,

m₁ = 40 kgf

m₂ = 30 kgf

h₁ = h₂ = h

t₁ = 4 min = 4× 60

t₂ = 3 min = 3× 60

Now,

(i) Work done is

(ii) Power developed is

(a)

(i)Work done to raise the block of mass 50kg is same for both.

(ii) Power= Work done/time. As the time taken by the first man is less therefore power developed is more

(b)

(i)Work done =

(ii) Power developed by first man=1000/20=50W

Power developed by second man=1000/50=20W

(a)

(i) Work done is same for both as both the people carry the same weight of water to the same height.

(ii) Power developed is

(b) Mass of the water lifted by both is

Hence, the work done is

Two forms of mechanical energy are:

(i) Kinetic energy

(ii) Potential energy

Elastic potential energy is possessed by wound up watch spring.

(a)Kinetic energy (K)

(b)Potential energy (U)

(c)Kinetic energy (K)

(d)Potential energy (U)

(e)Kinetic energy (K)

(f)Potential energy (U)

Potential energy: The energy possessed by a body by virtue of its specific position (or changed configuration) is called the potential energy.

Different forms of P.E. are as listed below:

(i) Gravitational potential energy: The potential energy possessed by a body due to its position relative to the centre of Earth is called its gravitational potential energy.

Example: A stone at a height has gravitational potential energy due to its raised height.

(ii) Elastic potential energy: The potential energy possessed by a body in the deformed state due to change in its configuration is called its elastic potential energy.

 Example: A compressed spring has elastic potential energy due to its compressed state.

Potential energy is possessed by the body even when it is not in motion. For example: a stone at a height has the gravitational potential energy due to its raised position.

Gravitational potential energy is the potential energy possessed by a body due to its position relative to the centre of earth.

For a body placed at a height above the ground, the gravitational potential energy is measured by the amount of work done in lifting it up to that height against the force of gravity.

Let a body of mass m be lifted from the ground to a vertical height h. The least upward force F required to lift the body (without acceleration) must be equal to the force of gravity (=mg) on the body acting vertically downwards. The work done W on the body in lifting it to a height h is

W= force of gravity (mg) x displacement (h)

=mgh

This work is stored in the body when it is at a height h in the form of its gravitational potential energy.

Gravitational potential energyU= mgh

The work done W on the body in lifting it to a height h is

W= force of gravity (mg) x displacement (h)

=mgh

This work is stored in the body when it is at a height h in the form of its gravitational potential energy.

Gravitational potential energy U= mgh

A body in motion is said to possess the kinetic energy. The energy possessed by a body by virtue of its state of motion is called the kinetic energy.

(a) Kinetic energy =

(b) 

According to the work-energy theorem, the work done by a force on a moving body is equal to the increase in its kinetic energy.

Body of mass m is moving with a uniform velocity u. A force is applied on the body due to which its velocity changes from u to v and produces an acceleration a in moving a distance S.Then,

Work done by the force= force x displacement

W = F x S---------(i)

From relation : v² = u²+2 a S

Kinetic energy, where p is the momentum.

Both the masses have same momentum p. The kinetic energy, K is inversely proportional to mass of the body.

Hence light mass body has more kinetic energy because smaller the mass, larger is the kinetic energy.

Kinetic energy is related to momentum and mass as

As the kinetic energy of both bodies are same, momentum is directly proportional to square root of mass.

Now, mass of body B is greater than that of body A.

Hence, body B will have more momentum than body A.

The three forms of kinetic energy are:

(i)Translational kinetic energy- example: a freely falling body

(ii)Rotational kinetic energy-example: A spinning top.

(iii)Vibrational kinetic energy-example: atoms in a solid vibrating about their mean position.

(a)Motion.

(b)Position.

When the string of a bow is pulled, some work is done which is stored in the deformed state of the bow in the form of its elastic potential energy. On releasing the string to shoot an arrow, the potential energy of the bow changes into the kinetic energy of the arrow which makes it move.

The compressed spring has elastic potential energy due to its compressed state. When it is released, the potential energy of the spring changes into kinetic energy which does work on the ball if placed on it and changes into kinetic energy of the ball due to which it flies away.

When the pebble is thrown upwards, the kinetic energy in it is converted to potential energy.

At the top point in its motion, its kinetic energy is completely converted into potential energy.

While coming down, the potential energy is converted into kinetic energy and at the bottom the potential energy is completely converted to kinetic energy.

When water falls from a height, the potential energy stored in water at a height changes into the kinetic energy of water during the fall. On striking the ground, a part of the kinetic energy of water changes into the heat energy due to which the temperature of water rises.

Kinetic energy.

Kinetic energy.

      The six different forms of energy are:

      1.Solar energy

      2.Heat energy

      3.Light energy

      4.Chemical or fuel energy

      5.Hydro energy

      6.Nuclear energy

(a) Potential energy of wound up spring converts into kinetic energy.

(b) Chemical energy of petrol or diesel converts into mechanical energy (kinetic energy)

(c) Kinetic energy to potential energy

(d) Light energy changes into chemical energy

(e) Electrical energy changes into chemical energy

(f) Chemical energy changes into heat energy

(g) Chemical energy changes into heat and light energy

(h) Chemical energy changes into heat, light and sound energy

(a)Electrical energy into sound energy

(b)Heat energy into mechanical energy

(c)Sound energy into electrical energy

(d)Electrical energy to mechanical energy

(e)Electrical energy into light energy

(f)Chemical energy to heat energy

(g)Light energy into electrical energy

(h)Chemical energy into heat energy

(i)Chemical energy into electrical energy

(j)Chemical energy to mechanical energy

(k)Electrical energy into heat energy

(l)electrical energy into mechanical enegy

(m)Electrical energy into magnetic energy.

The process used to transfer nuclear energy to electrical energy is called nuclear fission.

No. This is because, whenever there is conversion of energy from one form to another apart of the energy is dissipated in the form of heat which is lost to surroundings.

During the transformation of energy from one form to another desired form, some part of the energy gets converted to some undesirable form or a part of it is lost to the surroundings due to the friction or radiations which cannot be used for any productive purpose. This is called dissipation of energy, and this undesirable part of energy is called degraded energy.

During the transformation of energy from one form to another desired form, some part of energy is converted to some undesirable form or a part of it is lost to the surroundings due to the friction or radiations which cannot be used for any productive purpose. This is called dissipation of energy or degradation of energy.

Example:

When a light bulb glows, a major part of the electrical energy utilised is converted to heat energy while some part is converted to useful light energy.

Conversion of part of energy into an undesirable form is called dissipation of energy/degradation of energy.

Potential energy

Hint: P.E. is the energy possessed by a body by virtue of its position.

(d) Chemical to electrical

Hint: When current is drawn from an electric cell, the chemical energy stored in it changes into electrical energy.

Height H₁= h

Height H₂= 2h

Mass of body 1= m

Mass of body 2= m

Gravitational potential energy of body 1 =mgH₁= mgh

Gravitational potential energy of Body 2=mgH₂= mg (2h)

Ratio of gravitational potential energies

=

Given that,

Mass, m=1kg

Height, h=5m

Gravitational potential energy, P. E= mgh

=1 × 10 × 5 = 50J

When the mass just before hits the ground, by conservation of energy, all its potential energy is converted to kinetic energy.

i.e., K.E = P.E = 50 J

Given that,

Gravitational potential energy = 29400 J

Force of gravity = mg = 300 × 9.8N/kg = 2940N

Gravitational potential energy = mgh

29400 = 2940 × h

h = 10m

Mass, m = 10 kg

initial height, h₁ = 20 m

final height, h₂ = 8 m

Gravitational acceleration, g = 10 ms^-2

(i)

Now,

Loss of potential energy of the body, ΔP.E = mg (h₂ - h₁)

=10× 10× (20 - 8)

= 1200 J

(ii)

The total energy possessed by the body at any instant remains constant for free-fall.

It is equal to the sum of P.E. and K.E.

∴ At height 20 m, i.e., at topmost point, K .E= 0.

Total energy = P .E. + K.E.

Total energy = mgh₁ + 0 = 2000 J

Mass = 0.5 kg

Energy = 1 J

Gravitational potential energy = mgh

1 = 0.5 x 10 x h

1 = 5h

Height, h = 0.2 m

Force of gravity on boy=mg= 50 x 10 = 500 N

Increase in gravitational potential energy = Mg (h₂ - h₁)

= 500 x (9 - 3)

= 500 x 6 = 3,000 J

Mass of water, m = 50kg

Height, h = 15m

Gravitational potential energy = mgh

=50 x 10 x 15

=7500 J

Mass of man= 50 kg

Height of ladder, h₂=15 m

(i)Work done by man =mgh₂

= 50 x 9.8 x 15 = 7350 J

(ii) Increase in his potential energy:

Initial distance, h1= 0 m

Gravitational potential energy = Mg × Δh

= 50 x 9.8 x (15 - 0)

= 50 x 9.8 x 15 = 7350 J

F =150N

1. Work done by the force in moving the block 5m along the slope = Force x displacement in the direction of force =100 x 5 =500 J
2. The potential energy gained by the block

   U =mgh where h =3m

   =100 x 3 = 300 J

   The potential energy gained by the block is 300 J.
3. The difference i.e., 500 – 300 = 200 J energy is used in doing work against friction between the block and the slope, which will appear as heat energy.

Given that

Mass, m = 5 kg

Velocity, v = 10m/s

Now,

= 250 J

If the speed is halved (keeping the mass same), the kinetic energy decreases, it becomes one-fourth (since kinetic energy is proportional to the square of velocity).

Given, velocity of first body v₁=v

And velocity of second body, v₂ =2v

Since masses are same, kinetic energy is directly proportional to the square of the velocity ()

Hence, ratio of their kinetic energies is:

Mass of ball= 0.5kg

Initial velocity=5m/s

Initial kinetic energy=

Final velocity of the ball =3m/s

Final kinetic energy of the ball =

Change in the kinetic energy of the ball = 2.25 J - 6.25J = -4J

There is a decrease in the kinetic energy of the ball .

Mass of canon ball= 500g=0.5 kg

Speed, v=15m/s

(a)Kinetic energy of ball =

(b)Momentum of the ball = mass x velocity

=0.5 x15=7.5kgm/s

Let initial Mass, m₁= 10kg and velocity, v₁ =20 m/s

Final mass, m₂=2 x10=20 kg and velocity, v₂=20/2= 10m/s

Initial kinetic energy, K₁=

Final kinetic energy, K₂=

u=36 km/h=

and v=72km/h=

mass of the truck =1000 kg

(i) 

(ii) Power

Mass of body = 60kg

Momentum, p=3000kgm/s

(a)Kinetic energy

=7.5 x 10⁴J

(b)Momentum = mass x velocity

3000 = 60 x velocity

Velocity =50m/s

Momentum, p= 5 kg m/s

Mass of ball =50 g=0.05kg

(a)Kinetic energy of the ball

Mass of box=20 kg

(a)Zero work is done as there is no displacement of the man.

(b)Work done, Kinetic energy of man

=

(c) Work done in raising the box, Potential energy = mgh

     U= 20 x 10 x0.5=100J

Mass of bullet =50g = 0.05kg

Velocity=500m/s

Distance penetrated by the bullet=10cm=0.1m

(a)Kinetic energy of the bullet=

(b)Work done by the bullet against the material of the target= resistive force x distance

6250= resistive force x 0.1m

Resistive force=62500N

Mass of trolley = 0.5 kg

Velocity = 2 m/s

When the compressed spring is released, its potential energy is converted into kinetic energy completely.

Potential energy of compressed spring = kinetic energy of moving trolley

Kinetic energy of trolley =

Hence, potential energy of compressed spring=1.0J

According to the law of conservation of energy, energy can neither be created nor can it be destroyed. It only changes from one form to another.

According to the law of conservation of mechanical energy, whenever there is an interchange between the potential energy and kinetic energy, the total mechanical energy (i.e., the sum of kinetic energy K and potential energy U) remains constant i.e., K + U = constant when there are no frictional forces.

Mechanical energy is conserved only when there are no frictional forces for a given system (i.e. between body and air). Thus, conservation of mechanical energy is strictly valid only in vacuum, where friction due to air is absent.

Motion of a simple pendulum and motion of a freely falling body.

Kinetic energy of the body changes to potential energy when it is thrown vertically upwards and its velocity becomes zero.

(a)Potential energy

(b)Potential energy and kinetic energy

(c)Kinetic energy

Let a body of mass m be falling freely under gravity from a height h above the ground (i.e., from position A). Let us now calculate the sum of kinetic energy K and potential energy U at various positions, say at A (at height h above the ground), at B (when it has fallen through a distance x) and at C (on the ground).

(i)At the position A (at height h above the ground):

Initial velocity of body= 0 (since body is at rest at A)

Hence, kinetic energy K =0

Potential energy U = mgh

Hence total energy = K + U= 0 + mgh =mgh-----(i)

(ii) At the position B (when it has fallen a distance x):

Let v₁ be the velocity acquired by the body at B after falling through a distance x. Then u=0, S =x, a=g

From equation v²= u²+2aS

---------(ii)

(iii) At the position C (on the ground):

Let the velocity acquired by the body on reaching the ground be v. Then u=0, S=h, a=g

From equation: v²= u²+2aS

v²= 0²+2gh

v²= 2gh

And potential energy U=0 (at the ground when h=0)

Hence total energy= K+U= mgh + 0=mgh ------(iii)

Thus from equation (i), (ii) and (iii), we note that the total mechanical energy i.e., the sum of kinetic energy and potential energy always remain constant at each point of motion and is equal to initial potential energy at height h.

When the bob swings from A to B, the kinetic energy decreases and the potential energy becomes maximum at B where it is momentarily at rest.

From B to A, the potential energy again changes into the kinetic energy and the process gets repeated again and again.

Thus while swinging, the bob has only the potential energy at the extreme position B or C and only the kinetic energy at the resting position A. At an intermediate position (between A and B or between A and C), the bob has both the kinetic energy and potential energy, and the sum of both the energies (i.e., the total mechanical energy) remains constant throughout the swing.

(a)At position A, pendulum has maximum kinetic energy and its potential energy is zero at its resting position. Hence, K=mgh and U= 0.

(b)At B, kinetic energy decreases and potential energy increases. Hence, K= 0 and U=mgh

(c)At C also, kinetic energy K= 0 and potential energy U=mgh.

a) Extreme position: Potential energy

b) Mean position: Kinetic energy

c) Between mean and extreme: Both kinetic energy and potential energy

(d) Potential energy of the ball at the highest point is mgh.

Hint: At the highest point, the ball momentarily comes to rest and thus its kinetic energy becomes zero.

(d) The sum of its kinetic and potential energy remains constant throughout the motion.

Hint: In accordance with the law of conservation of mechanical energy, whenever there is an interchange between the potential energy and kinetic energy, the total mechanical energy remains constant.

Potential energy at the maximum height= initial kinetic energy

(a)Potential energy at the greatest height = initial kinetic energy

or, mgh

(b)Kinetic energy on reaching the ground= potential energy at the greatest height=56.25 J

(c)Total energy at its half way point==56.25J

(a)

(i)Potential energy of the ball =mgh

=2 x 10 x 5=100J

(ii)Kinetic energy of the ball just before hitting the ground = Initial potential energy= mgh=2x10x5=100J

(b)Mechanical energy converts into heat and sound energy.

(a)Mass of skier= 60kg

Loss in potential energy = mg(h₁ –h₂)

=60 x 10 x(75-15)

= 60 x 10 x60=3.6x10⁴J

(b)Kinetic energy at B

=2.7x 10⁴J

Kinetic energy

27000

Potential energy = mgh

Efficiency = 40 %

Useful work done = 40 % of potential energy

Total Kinetic energy at mean position=

Given:

mass of the pendulum bob, m = 200 g = 0.2 kg

height raised at position B, h = 5 m

acceleration due to gravity, g = 10 m/s²

(a) The potential energy of the pendulum at position B can be calculated using the formula for potential energy:

Potential energy at position B, P.E_B = mgh

P.E_B = 0.2 kg × 10 m/s² × 5 m

P.E_B = 10 J

(b)

Total energy at point C, M.E_C = Potential energy at its extreme position.

 = 10 J

(c) Now,

K.E. at mean position, K.E_A = Potential energy at extreme position, P.E_B

∴ v_A = 10 m/s