Class 10 SELINA Solutions Maths Chapter 19 - Constructions (Circles)

Steps Of Construction:

i) Draw a circle with centre O and radius 3 cm.

ii) From O, take a point P such that OP = 5 cm

iii) Draw a bisector of OP which intersects OP at M.

iv) With centre M, and radius OM, draw a circle which intersects the given circle at A and B.

v) Join AP and BP.

AP and BP are the required tangents.

On measuring AP = BP = 4 cm

1. Draw a circle of diameter 9 cm, taking O as the centre.
2. Mark a point P outside the circle, such that PO = 7.5 cm.
3. Taking OP as the diameter, draw a circle such that it cuts the earlier circle at A and B.
4. Join PA and PB.

Steps of Construction:

i) Draw a circle with centre O and radius 5 cm

ii) Draw arcs making an angle of 180º - 45º = 135º at O such that AOB = 135º

iii) AT A and B, draw two rays making an angle of 90º at each point which meet each other at point P, outside the circle.

Thus, AP and BP are the required tangents which make an angle of 45º with each other at P.

Steps of Construction:

i) Draw a circle with centre O and radius 4.5 cm

ii) Draw arcs making an angle of 180º - 60º = 120º at O such that AOB = 120º

iii) AT A and B, draw two rays making an angle of 90º at each point which meet each other at point P, outside the circle.

iv) AP and BP are the required tangents which make an angle of 60º with each other at P.

Steps of construction:

i) Draw a line segment BC = 4.5 cm

ii) With centers B and C, draw two arcs of radius 4.5 cm which intersect each other at A.

iii) Join AC and AB.

iv) Draw perpendicular bisectors of AC and BC intersecting each other at O.

v) With centre O, and radius OA or OB or OC draw a circle which will pass through A, B and C.

This is the required circumcircle of triangle ABC.

On measuring the radius OA = 2.6 cm

Steps of Construction:

i) Construction of triangle:

a) Draw a line segment BC = 7 cm

b) At B, draw a ray BX making an angle of 45^o and cut off BE = AB - AC = 1 cm

c) Join EC and draw the perpendicular bisector of EC intersecting BX at A.

d) Join AC.

is the required triangle.

ii) Construction of incircle:

e) Draw angle bisectors of and intersecting each other at O.

f) From O, draw perpendiculars OL to BC.

g) O as centre and OL as radius draw circle which touches the sides of the . This is the required in-circle of .

On measuring, radius OL = 1.8 cm

 Steps of Construction:

i) Draw a line segment BC = 5 cm

ii) With centers B and C, draw two arcs of 5 cm radius each which intersect each other at A.

iii) Join AB and AC.

iv) Draw angle bisectors of and intersecting each other at O.

v) From O, draw .

vi)Now with centre O and radius OL, draw a circle which will touch the sides of

On measuring, OL = 1.4 cm

Steps of construction:

i) Draw a line segment AB = 6 cm

ii) At A, draw a ray making an angle of 60^o with AB.

iii) With B as centre and radius = 6.2 cm, draw an arc which intersects ray AX at C.

iv) Join BC.

is the required triangle.

v) Draw the perpendicular bisectors of AC and BC intersecting each other at O.

vi) With centre O, and radius as OA or OB or OC, draw a circle which will pass through A, B and C.

vii) From O, draw .

Proof: In right and

OA = OB (radii of same circle)

Side OD = OD (common)

Steps of Construction:

i)Draw a line segment BC = 4 cm.

ii) At C, draw a perpendicular line CX and from it, cut off CE = 2.5 cm.

iii) From E, draw another perpendicular line EY.

iv) From C, draw a ray making an angle of 45^o with CB, which intersects EY at A.

v) Join AB.

is the required triangle.

vi) Draw perpendicular bisectors of sides AB and BC intersecting each other at O.

vii) With centre O, and radius OB, draw a circle which will pass through A, B and C.

Measuring the radius OB = OC = OA = 2 cm

i) Point O is called the circumcentre of circumcircle of .

ii) OA, OB and OC are the radii of the circumcircle. Hence, OA = OB = OC

iii) Yes, the perpendicular bisector of BC will pass through O.

i) O is called the incentre of the incircle of .

ii) OR and OQ are the radii of the incircle and OR = OQ.

iii) OC is the bisector of angle C

Steps of Construction:

i) Draw a line segment BC = 6 cm.

ii) With centre B and radius 8 cm draw an arc.

iii) With centre C and radius 5 cm draw another arc which intersects the first arc at A.

iv) Join AB and AC.

is the required triangle.

v) Draw the angle bisectors of intersecting each other at I. Then I is the incentre of the triangle ABC

vi) Through I, draw

vii) Now from D, cut off

viii) With centre I, and radius IP or IQ, draw a circle which will intersect each side of triangle ABC cutting chords of 2 cm each.

Steps of construction:

i) Draw a line segment BC = 6 cm

ii) With centers B and C, draw two arcs of radius 6 cm which intersect each other at A.

iii) Join AC and AB. Thus, ABC is an equilateral triangle.

iv) Draw perpendicular bisectors of AC and BC intersecting each other at O.

v) With centre O, and radius OA or OB or OC draw a circle which will pass through A, B and C.

This is the required circumcircle of triangle ABC.

Steps of Construction:

i) Draw a line segment BC = 5.6 cm.

ii) With centers B and C, draw two arcs of 5.6 cm radius each, which intersect each other at A.

iii) Join AB and AC. Thus, ABC is an equilateral triangle.

iv) Draw angle bisectors of and intersecting each other at O.

v) From O, draw .

vi) With centre O and radius OL, draw a circle which will touch the sides of _.

This is the required circle.

Steps of Construction:

i) Draw a regular hexagon ABCDEF with each side equal to 5 cm and each interior angle 120º.

ii) Join its diagonals AD, BE and CF intersecting each other at O.

iii) With centre as O and radius OA, draw a circle which will pass through the vertices A, B, C, D, E and F.

This is the required circumcircle.

Steps of Construction:

i) Draw a line segment AB = 5.8 cm

ii) At A and B, draw rays making an angle of 120^o each and cut off AF = BC = 5.8 cm

iii) Again at F and C, draw rays making an angle of 120^o each and cut off FE = CD = 5.8 cm.

iv) Join DE. Then ABCDEF is the regular hexagon.

v) Draw the bisectors of intersecting each other at O.

vi) From O, draw

vii) With centre O and radius OL, draw a circle which touches the sides of the hexagon.

    This is the required incircle of the hexagon.

Steps of Construction:

i) Draw a regular hexagon ABCDEF with each side equal to 4 cm and each interior angle 120º.

ii) Join its diagonals AD, BE and CF intersecting each other at O.

iii) With centre as O and radius OA, draw a circle which will pass through the vertices A, B, C, D, E and F.

This is the required circumcircle.

Steps of Construction:

i) Draw a line segment OP = 6 cm.

ii) With centre O and radius 3.5 cm, draw a circle.

iii) Construct the perpendicular bisector of AP intersecting OP at point M. Thus, M is the midpoint of OP.

iv) With centre M and radius MP, draw a circle which intersect the given circle at points T and S.

v) Join PT and PS.

Thus, PT and PS are the required tangents.

On measuring, the length of PT = PS = 4.8 cm.

i.

1. Draw a line BC = 5.5 cm.
2. Draw AB = 6 cm, such that m∠ABC = 120°.
3. Construct the perpendicular bisectors of AB and BC, such that they intersect at O.
4. Draw a circle with O as the radius. 

ii.

(e) Extend the perpendicular bisector of BC, such that it intersects the circle at D.

(f) Join BD and CD.

(g) Here BD = DC and hence point D is equidistant from B and C.

(h) Join AD

Thus, ABCD is the reuired cyclic quadrilateral.

Steps of construction:

i) Draw a line segment AB = 5 cm

ii) At A and B, draw rays making an angle of 120^o each and cut off AF = BC = 5 cm

iii) Again at F and C, draw rays making an angle of 120^o each and cut off FE = CD = 5 cm.

       iv) Join DE.

Then ABCDEF is the regular hexagon of side 5 cm.

Steps for construction:

1. Draw AB = 5 cm using a ruler.
2. With A as the centre cut an arc of 3 cm on AB to obtain C.
3. With A as the centre and radius 2.5 cm, draw an arc above AB.
4. With same radius, and C as the centre draw an arc to cut the previous arc and mark the intersection as O.
5. With O as the centre and radius 2.5 cm, draw a circle so that points A and C lie on the circle formed.
6. Join OB.
7. Draw the perpendicular bisector of OB to obtain the mid-point of OB, M.
8. With the M as the centre and radius equal to OM, draw a circle to cut the previous circle at points P and Q.
9. Join PB and QB. PB and QB are the required tangents to the given circle from exterior point B.

QB = PB = 3 cm

That is, length of each tangent is 3 cm.  

Steps of construction :

1. Draw a line AB = 7 cm.

2. Taking A as centre and any radius, draw an arc of a circle which intersects AB at M.

3. Taking M as centre and with the same radius as before drawn an arc intersecting previously drawn arc, at point N.

4. Draw the ray AX passing through N, then

5. Taking A as centre and radius equal to 5 cm, draw an arc cutting AX at C.

6. Join BC

7. The required triangle ABC is obtained.

8. Draw angle bisector of ∠CAB which is the locus of points equidistant from AB and AC.

9. Draw angle bisector of ∠ABC which is the locus of points equidistant from BA and BC.

10. Mark the intersection of angle bisectors as O.

11. Draw OD perpendicular to AB.

10. With O as center and radius OD, draw a circle which will touch all the three sides of triangle ABC.

Steps for construction :

i. Draw BC = 6.8 cm.

ii. Mark point D where BD = DC = 3.4 cm, which is the mid-point of BC.

iii. Mark a point A which is intersection of arcs AD = 4.4 cm and AB = 5 cm from a point D and B respectively.

iv. Join AB, AD and AC.

ABC is the required triangle and AD is the median.

v. Draw bisectors of angle B and angle C which are ray BX and CY. Let these bisectors intersect at point I.

vi. Draw IM perpendicular to BC, where I is the incentre of a circle.

vi. Taking IM as radius, draw incircle of a triangle ABC.

Steps for construction :

i. Draw concentric circles of radius 4 cm and 6 cm with centre of O.

ii. Take any point P on the outer circle.

iii. Join OP.

iv. Draw perpendicular bisector of OP intersecting OP at point M. Then, M is the midpoint of OP.

v. Take length = OM, mark arcs from M on the inner circle as A and B respectively.

vi. Join PA and PB.

We observe that PA and PB are tangents from outer circle to inner circle are equal of a length 4.5 cm each.

Steps for construction :

i. Draw BC = 7.2 cm.

ii. Draw an angle ABC = 90° using compass.

iii. From B, mark a point A at a distance of 6 cm from B.

iv. Join AC.

Thus, ABC is the required right-angled triangle.

v. From point B, draw perpendicular to AC using compass intersecting AC at point D.

v. Draw perpendicular bisectors of AB and BC which intersect at I, where I is the circumcentre of a circle.

vi. Draw circumcircle using circumcentre I. we get radius of a circle is 4.7 cm.